tc1hydro @ trueCarpentry

click ^ me

To Use a Measure

Our Model is built on some same Calculation as a Hydrostar unit,

with Newton + Nasa study for proper regression math calculation to modify, for faster separations of H20 into separate,

Orthohydrogen, & Oxygen Gas. Some people call this Hydroxy Fuel. This Kit also supports several different type electrode assemblies, of interchangeble intergration electrode sets, (see below animation), a good well designed electrolyser cell with saftey exit.

Kit comes complete with modify one of three differ electrode sets,

all supporting 12 differs. The 3 Kits are, !

8 ' 16 set, or

24 arc 32 QUAD set.

or the tc3b Hydro, larger volume cylindrical prototype set.

Parts of these units or our single cell units, no/kit, can be purchased from us on the parts page.

Holds 1 Liter of water... runs distances 40 - 60 miles aprox (boosted versions) or 90 miles nb versions/ aprox, before refilling needed . See water tank kit for extra long distance for over the road drivers...!

Percentage savings on small V*8 engines is based at 25% average minumal, with one #32990 set kit, more to intergration. &

Highway city driving split @ 65% 35%. @14 amps electrolysis of catalyst. ie TESTED on road*

City driving less of economic, under thermodynamic law also.

Hwy better than city is not only matter. One may obtain much higher or even lower

gas savings other than this depending on application, installation, type of vehicle,

position on the globe, & amperes used, including driving conditions. We cannot warranty mileages because of many factors and false standards, including evaporating ethanols.

Colder climates tend to reduce efficiency if used alcohol additive. (Alaska)

Heater wire wrap instead, can remove some of that inefficiency...!

Some tcHydro Stat Data; @ 85-95F 4 cylinder 6 cylinder 8 cylinder example

Some of our lab and road test work is done on two differ makes GM / FORD both American standard sized product.

V*8 engines. We advise use of protective lead additives, even in vehicles without using hydrogen, to protect valves in older cars from robbed octanes and added ethanols. Destruction of an engine is not the way to drive. See The CD-2 COATING a one type of protection help... 1 bottle of cd2 helps tc1 or tc3 hydros for good protection to and helps seat the valves in four stroke engines, treats 160 gallons.

This Particular Model tc1 has been road tested for period of 10+ years now

with all upgrades in place for better performance.

See parts pages for average maintain time of the power electrodes.

And ask for the "fire in the hole" tc1 model for easy maintains.

- short disclaimer to our buyers -

Any one, using other than water inside this unit, for hydrogen production,

voids all claims made of here and on this website,

including warranty.

Product is with a 1iwbw/Patent.

However, anyone that is buyer, is

permitted to rebuild same electrolyser cells, for own residential personal uses.

This is under our statement said to you here. Please add other type electrodes first,

for space saving on install w/wire size change. Before adding second units...

PRODUCT Guaranteed to produce safe hydrogen oxygen fuel seperation of H2O - water, into H & O gas.

See this item also at our

tc1hydro warranty

We comply with all ASTM standards...

The 3 Type KIT Purchases below Include ;

Full Install Kit.

One Bottle of CD-2 Gas Treatment,

(inside united states only)

Quality Check Valve.

& is NASA Quality Built.

Below buttons must have proper quanity amount

changed inside on pay pal page to be honored if purchaseing more than 1 unit.

tc1Hydro Kit 8 arc 16 set #32990 is US $315.00

Shipping & Handling USPS or UPS - in the U.S. is - $24.95

140 ampere rated; Total amount .. US $339.95

Price Includes US Shipping

tc1Hydro Kit BOOSTED 24 arc 32 Quad type ... #32991 is US $359.00

Shipping & Handling USPS or UPS - in the U.S. is - $24.95

200 ampere rated; Total amount .. US $383.95

- tc3b BOOSTED 3/4 - 1 ton truck prototype w/Install Kit - # 32995 is US $389.00

Shipping & Handling USPS or UPS - in the U.S. is - $24.95

240 ampere rated; Total amount .. US $413.95

OR pay with Easy Google.

Interchangable Intergration Works on All Models

BiG RiG 18 wheelers, ask for special custom built tc3HYDRO model, Ask questions from email Contact us

or see a photo of this specific BiG RiG model on our parts page's

very international orders accepted, > added shipping & handling <, ask us @ Contact us

Then add slight extra shipping charges with the red outlined button below pay pal.

Caution, Countries such as UK do charge duty Custom fees, Warning

These package Kits are aproximate 10-24 lbs.

Use a

e$conversion calculator

international � curencys

WE also accept, USPS money orders or bank cashiers checks for this item in the postal mail system...

?Contact us first please for your payment snail mail sending information.

Please give normal 3-10 days shipping time inside United States.

Outside United States, give 3 - 21 days... (normally USPS shipped )

EXPECT SLIGHT SHIPPING DELAYS UPON BUSY SEASON's...

WE always ship UPS or USPS depending upon availibiltiy & your requests.

Shipping can be adjusted for express shipments with the add extra shipping button above.

Price includes regular United States shipping and insurance, hidden web links

on CD passworded, for extra maintain it yourself construction hints.

Kit is c omplete with installation instruction & CAD electrical schematic.

All parts of tc1hydro kits are new with these names listed below from our international suppliers.

WE only use high quality parts made from high quality company's.

Some vary slightly from the list, but list is always appended updated.

All tchydros are bench tested before shipment.

Unit Housing is ABS-1 material, built to statistics for heat and pressure limits at astm website.

All installers & users, should know heat & amp limits before installations and usages.

CAUTION , > ITEM pays for itself, then pays to you...' Saving you BIG Fuel $ ' !!!

See Video of smaller type dry cell usages in goverment city vehicles...

HYDROTRACTOR

dont wait they dont.

INSTALLATIONS LOCAL AREA ONLY.

See our Service Carpentry page for service AREA MAP....

Installation charge $899.00 labor only, - all cars, mini vans & tiny trucks. Larger Pkp trucks, Suv's $749.00 labor

Installations require prepayment full amount

( includes not shown brass transfer valve and tank jacket)

Special order bubble bottles are availble for differ stationary type useages, use Contact us

Listing of parts

View Photos & Gauges

tc1Hydro no kit cell & parts

some other PWMs if desired by owner...

Design of tc1Hydro units do not necessarly require Pulse Width Modulation units for making more Hydrogen Fuel..

Though it is up to the consumer if wanted of to apply these, for its perfection of moving atoms quicker.

the tc3b model is a model that is tip to wall parital sandwich type, invloved in our list of models above, but not a full 100 % requirement of to have PWM.

tc1Hydro Kit includes;

1 tcHydro ABS with sensor/brass barbs/inner electrodes. SIZE is 16 inches by 4 inches OD

1 Above tc1 hydro Flame Arrestor w/bracket

20 ft of 12gauge awg red wire

12 ft of 12gauge awg blk wire

Installation high amp switch with water level bulb indicator w/mounting bracket.

30 amp FUSE HOLDER w/ 30amp fuses.

AMP gauge with mounting bracket & hardware/illuminate

Temp. gauge with mounting bracket & hardware/illuminate

12 ft of 16-18 gauge awg green wire for sensors and temp gauge.

1 package of assorted wire connectors & terminals.

10 ft of 7/16od 5/16id Clear Line chemical transfer.